欢迎来到公海710713_欢迎您

在线客服
55L kneader mixer

Advantage

1.All main electrics are imported, the alternating current contactor is Shilin brand. The switch and button are Taiwan Tend.

2.The air cylinder magnetic valve is imported famous brand, other small magnetic valve is Taiwan brand.

3.Hard tooth gear reducer with well-design structure, low noise, high efficiency and long service life.

4.The mixing shaft is made of nickel & chrome alloy steel. The high abrasion part is additional welded with imported anti abrasion welding rod, then electroplating with hard chrome which is more durable.

5.The main mixing chamber is whole set casting by high anti abrasion alloy steel, after special dealing then electroplating with hard chrome.

6.The anti leakage unit of side wall is made of high-tech material which is wear-resisting and easy to maintain.

7."M"shape of the pressure gland which make the mixing more thorough and even.

8.The main motor ampere meter is installed in the electrical control panel, under normal running, when the pressure of the mixing chamber is too big, the current exceeds the set value, the connector will automatically adjust the gland’s up and down via the magnetic valve to remit the pressure of the mixing chamber.

9.The mixing chamber is bigger, the diameter of the air cylinder is bigger and gear reducer is also bigger, which enhance the mixing effect,save mixing time and also save the cost.

Main parameter

Mixing capacity(L) 55L
Motor power 75KW 6P AC
Material feeding Front/back feeding
Temperature adjustment Steam heating or water cooling
Mixing capacity per batching About 50-60kgs/time
Mixing time 4-8mins/batching
Rotor RPM RPM/RPM
Temperature difference ±5o
gear reducer ZLY355
Tilting angle 140°
Machine size(mm) 3500x2600x3300
Machine weight 7800

Public equipment

Machine structure

Top